This feature is currently implemented for GPS-3 and SPS-2 sections only. Please use Find Sections to select GPS-3 or SPS-2 sections to view data for MEPDG inputs.
MEPDG Inputs (for AASHTOWare Pavement ME) for Section: |
Input |
Value |
Table |
Field |
Help Notes |
Traffic |
Initial AADTT |
See other sheets |
MEPDG_TRUCK_VOL_PARAMETERS |
AADTT_FIRST_YEAR_LTPP_LANE,
TRAFFIC_OPEN_YEAR_EXP_NO,
GPS_SPS,
EXPERIMENT_NO
|
Only information applying to time in the GPS-3 or SPS-2 experiment is displayed. |
Number of lanes in design direction |
1 |
See Notes |
Since tables MEPDG_TRUCK_VOL_PARAMETERS, MEPDG_AXLE_PER_TRUCK and MEPDG_AXLE_LOAD_DIST_FACTOR contain information on the number of trucks in the LTPP lane, no adjustments for two-way traffic or lane distribution are required. The adjustment factors are set to 1, or 100% as appropriate. |
Percent of trucks in design direction (%) |
100 |
See Notes |
Percent of trucks in design lane (%) |
100 |
See Notes |
Vehicle Class distribution and growth factor |
See other sheets |
MEPDG_TRUCK_VOL_PARAMETERS |
Vehicle_Class, Veh_Class_Growth_Rate, Veh_Class_Growth_Function |
The distribution percentage is applied to the first year’s data. |
Operational speed (mph) |
Use Default |
Use AASHTOWare Pavement ME default |
Axles per truck |
See other sheets |
MEPDG_AXLE_PER_TRUCK |
All fields |
|
Axle distribution |
See other sheets |
MEPDG_AXLE_LOAD_DIST_FACTOR |
All fields |
|
|
Climate |
Latitude
(degrees.minutes)
|
|
SECTION_COORDINATES |
LATITUDE |
The virtual weather station can be obtained for the LTPP section location by interpolation from the nearby weather stations. |
Longitude
(degrees.minutes)
|
|
SECTION_COORDINATES |
LONGITUDE |
Elevation
(ft)
|
|
INV_ID, SPS_ID |
ELEVATION |
|
Depth of water table
(ft)
|
|
SMP_WATERTAB_DEPTH_MAN |
WATERTAB_DEPTH |
Water table depth collected as a part of Seasonal Monitoring Program (SMP) is provided for those LTPP sections. The depth of water table is assigned based on experience and better guidelines is required for this input. |
|
Structure (Design Features) |
Joint spacing
(ft)
|
|
INV_PCC_JOINT or SPS2_PCC_JOINT_DATA |
AVG_CONTRACTION_SPACING |
The Inventory table contains information provided during the nomination process or when section is included in the LTPP program. The average joint spacing computed using the POINT_LOC field in the MON_DIS_JPCC_FAULT table is provided for verification purpose. |
|
MON_DIS_JPCC_FAULT |
POINT_LOC and CRACK_OR_JOINT |
Sealant type |
|
INV_PCC_JOINT or SPS2_PCC_JOINT_DATA |
TRANSVERSE_SEAL_TYPE |
The sealant type and determination of whether a joint was sealed was captured in the inventory tables at the time the section was nominated or included in the LTPP program. However, some sections where maintenance was performed, MNT_PCC_JOINT_RESEAL table in the JOINT_SEAL_TYPE table information is also provided. |
|
MNT_PCC_JOINT_RESEAL |
JOINT_SEAL_TYPE |
Dowel diameter
(in)
|
|
INV_PCC_JOINT or SPS2_PCC_JOINT_DATA |
ROUND_DOWEL_DIAMETER |
|
Edge support |
|
INV_SHOULDER or SPS_GENERAL |
SH_SURFACE_TYPE,
SH_SURFACE_TYPE_OTHER,
I_SH_SURFACE_TYPE,
I_SH_SURFACE_TYPE_OTHER,
O_SH_SURFACE_TYPE,
O_SH_SURFACE_TYPE_OTHER
|
No edge support option for AC shoulder type |
Base type |
|
TST_L05B |
LAYER_TYPE
(below LAYER_TYPE=PC)
|
LAYER_TYPE =GB (Granular Base), LAYER_TYPE =GS (Granular Subbase), LAYER_TYPE =TB (Treated (Bound) Base), LAYER_TYPE =TS (Treated (Bound) Subbase) |
Loss of full friction
(age in months)
|
See Notes |
|
|
Use AASHTOWare Pavement ME default |
Surface shortwave absorptivity |
See Notes |
|
|
Use AASHTOWare Pavement ME default |
|
|
|
|
|
Measured Performance (IRI, Transverse Cracking, Faulting)
|
|